![background image](http://html1.mh-extra.com/html/crux/rvcch-75k/rvcch-75k_installation-instructions-manual_2691657005.webp)
INTERFACING SOLUTIONS
RVCCH-75K
REAR-VIEW CAMERA & FORCE RVC
INTEGRATION INTERFACE
FOR CHRYSLER & JEEP VEHICLES 2014-UP
www.cruxinterfacing.com
5
CONNECTING THE REAR-VIEW CAMERA
In order to activate the Rear-View Camera feature, make sure Dip switch number 2 is set to “ON”.
Step 5
- Connect the RED power 12V cable from the camera to the WHITE Reverse (12V) trigger on the T-Harness.
Tap the BLACK wire on the 8-PIN connector for the GROUND to the camera.
NOTE: White wire will generate 12V when DIP 2 is ON and REVERSE is engaged, or the Force RVC is engaged.
Be sure to test the camera by placing the vehicle in REVERSE and con rming the camera display.
52-PIN
(female plug)
8-PIN
(male plug)
4 5 6
ON
1 2 3
TO FACTORY
DISPLAY
CAM INPUT
(female plug)
GREEN/
FORCE RVC OPTION
WHITE/
REVERSE OUT
4 5 6
ON
1 2 3
DIP 1 = OFF
2 = OFF
3 = OFF
4 = OFF
5 = OFF
DIP 6 = OFF
ACTIVATE
RVC & FRVC
CAN-BUS
INTERFACE
CAN-BUS
INTERFACE
OFF
STATUS LED’S
CAMERA
(NOT INCLUDED)
RED/
POWER 12
BLACK/
GROUND
52-PIN
(male plug)
VIDEO
(male plug)
SEE STEP 4
BLACK/
GROUND
FORCE
TAP RED/
12V CONSTANT
ON 8-PIN
rev.060115
RVC OPTION