background image

INTERFACING SOLUTIONS

RVCCH-75K

REAR-VIEW CAMERA & FORCE RVC

INTEGRATION INTERFACE

FOR CHRYSLER & JEEP VEHICLES 2014-UP

CHRYSLER

2015 - 2015  200

JEEP

2014 - 2015  Cherokee 

APPLICATION NOTES:

FOR UCONNECT 5” and 8.4”

DISPLAYS

THIS INTERFACE DOES NOT

OFFER VIDEO IN-MOTION.

DOES NOT INCLUDE CAMERA.

Contact Tech Support for more 

information.

PARTS INCLUDED

(1) CH-75K CAN Interface Module
(1) CH-75K 52-Pin T-Harness (2665)
(1) Instruction Sheet

SAFETY PRECAUTIONS

1. Please read through the entire instruction manual before starting any of the installation procedures.
2. We recommend disconnecting the negative side of the battery until ready to code the vehicle.
3. Do not install any of the main modules near any major components or near the HVAC system,
    as placing items near the HVAC may cause damage or overheating to the vehicle or interface.
4. We recommend not disconnecting any of the air bag connections behind the dash panels.
5. This product is under Crux’s 1 year manufacturer’s warranty. Warranty may be voided in the case where 
    the device shows proof of being opened or improper extreme force.

TECH SERVICES

All our products are manufactured under strict quality control. Each device is being tested before shipment. If nevertheless do occur problems 
or if you have technical questions, contact us directly:

Crux Interfacing Solutions Tech Support
1 (855) 822-1348 (Mon - Fri - 9:00 AM - 5:00 PM) 

 Time

www.cruxinterfacing.com

rev.060115

 

1

IMPORTANT: THIS INTERFACE STORES THE VIN NUMBER UPON INSTALLATION AND 

GETS CODED TO FUNCTION WITH THE SAME VEHICLE IN PARTICULAR. ONCE

INSTALLED IT CANNOT BE REUSED IN ANY OTHER VEHICLE.

 

Summary of Contents for RVCCH-75K








Reviews: