9
Before First Use
Before using your Bake and Blend Stand Mixer for the first time, remove any packaging
material and promotional labels. You may wish to keep the packaging for future use or
storage for your stand mixer.
Wash the mixer attachments, stainless steel mixing bowl and splashguard, blender and
blender lid in warm soapy water with a soft cloth, taking care with the blender’s sharp
blades. Rinse and dry thoroughly.
Wipe the stand mixer with a soft damp cloth to remove any manufacturing dust.
Before assembling, ensure the speed control dial is turned to the OFF position. The suction
feet underneath the unit are designed to stick to the work surface to prevent the unit from
travelling along the counter. Press these down firmly in place to adhere to the work surface.
Connect the unit to the mains supply.
Using the Bake and Blend Stand Mixer
MIXING/KNEADING/BEATING AND WHISKING
The bowl can be used to mix up to 2kg of dough, do not overload
as this will damage the motor.
1. Add the food ingredients to the bowl in accordance with
the recipe, and then open the multifunction head (3) using
the head release leaver (2) until it clicks into position.
See Fig 1.
2. Place the mixing bowl (9) on the base, and turn the mixing
bowl to lock it into position. (See Fig 1).
3. Attach the splashguard if using (8), and position the
opening at the front of the appliance see Fig 1. There is a
small indicator on the base that turns from red to green
when the bowl is locked into position correctly.
4. Fit the desired accessory either the whisk (11), the beater
12) or the dough hook (13) into the multifunction head,
pushing the shaft of the accessory and rotate to lock
into position see Fig 2.
Fig. 1
SZ3-14423_CRUX004_CRUX_Stand Blender_MPL_IM.indd 9
2017-06-09 3:17 PM
