7
3. The housing may be wiped with a damp cloth.
CAUTION:
Do not immerse motor housing in water or other liquids.
CAUTION:
When the battery indicator LED (1) display is red, it indicates the appliance has
a low battery. You shall recharge it by placing the charge base (7) and connect the power
outlet for charging.
NOTE:
The included battery pack is semi-charged.
CAUTION:
DO NOT PLACE FINGERS ON BLENDING BLADE. The blades are very sharp
Before use, ensure that you fully charge the included battery pack completely prior to using
for the first time.
Operating Instructions
IMPORTANT: Blades are very sharp, handle with care. Ensure the immersion blender is
unplugged from the power outlet before assembling or removing attachments.
1. To assemble the detachable blending shaft to the motor handle, align the arrows on the
blending shaft and motor handle. Once aligned, press and hold the button above the
arrow on the motor handle and connect the detachable blending shaft and motor handle
together. Release the button once connected. (See Figure 2)
2. Lower the cordless blender into food and firmly press down on the POWER ( ) button
and the LOCK Button ( ) located at the top of the motor handle simultaneously in order
to begin blending.
NOTE:
Always hold the immersion blender straight in a upright position to ensure no
ingredients being blended splash over.
3. When finished processing, stop the cordless blender by releasing the POWER ( )
button and the LOCK ( ) on the back of the motor handle.
4. To disassemble, press and hold the button above the arrow on the motor handle and
detach blending shaft from the motor handle. Release the button once. (See Figure 3)
CAUTION:
Make sure the level of liquid or food in the container is below the joint of the
blender, as this could cause an electric shock.
