CrustBuster Speed King Drive Over- Pit, Owner'S Manual

Page: 5 / 24

3
Lubrication and Maintenance
CAUTION: STOP ALL MOTORS AND LOCK OUT POWER SOURCE
BEFORE SERVICING CONVEYOR.
CAUTION: IF GUARDS OR SHIELDS ARE REMOVED TO SERVICE
UNIT, REPLACE IMMEDIATELY AFTER COMPLETION OF
WORK.
IMPORTANT: THE LUBRICATION PERIODS RECOMMENDED ARE
BASED ON NORMAL USAGE. SEVERE OR UNUSUAL
CONDITIONS MAY REQUIRE MORE FREQUENT
LUBRICATION.
IMPORTANT: CLEAN FITTINGS THOROUGHLY BEFORE LUBRICATING.
REPLACE MISSING OR DAMAGED GREASE FITTINGS
IMMEDIATELY.
SERVICE/YEARLY (PRIOR TO START UP) LUBRICANT:
Electric Motor
1 to 2 Full Strokes Shell Oil Co. "Dolium R"
Chevron Oils "SRI No. 2"
Texaco Inc. "Premium RB"
SERVICE/WEEKLY ( 20 HOURS ) LUBRICANT:
Flange Bearings SAE Multi-Purpose Grease
Drive Over-Pit Conveyor Maintenance
™
Due to the characteristics of certain materials, a residue may build up. If this is a problem or
gets excessive, wash out the conveyor. Allow to dry before using.
Hydraulic Requirements:
15 gallons per minute at 1800 psi.
In order to operate a hydraulic drive BeltVeyor and a hydraulic Drive Over-Pit Conveyor off
™
of the same tractor, the tractor will need to have a
Closed Center Hydraulic System
with
Individual Flow Control
for each valve
and a flow rate of
32 gallons per minute at 2000 psi.
Electric Requirements:
5 hp 1800 RPM