18
Frame and Axle
General
The frame and axle of the cart are built of different materials depending on the model of the cart. In
most cases, however, the frames and axles are designed to withstand the most demanding farm
use with a considerable margin of safety.
Hitch Assembly
Your tractor must have a clevis type draw bar.
The hitch on the 850 cart is a ring type hitch similar to those used on implements in Europe. It is
adjustable up and down to allow for different draw bar heights. It also is adjustable for 1½" or 2"
hitch pin diameters. It allows for angular motions of 40 degrees, thus eliminating the need for a
slotted hitch pin hole or a rotating hitch.
The clevis attachment furnished is for transporting empty cart only. DO NOT use clevis
for field use.
#873547 - Hitch Assembly
Item Qty Part No.
Description
1
1
333294
HHCS 3/4" x 6" Gr8
2
1
607481
Hitch Clevis
3
1
607499
Hitch V-Block
4
1
00497800 Hex Nylock Nut 3/4" Gr8
5
1
607465
Hitch Spade
6
2
607507
Clevis Cushion
7
1
607515
Top Plate
Item Qty Part No.
Description
8
1
02307700 HHCS 3/4" x 3" Gr5
9
1
330316
Hex Nylock Nut 3/4" Gr5
10
1
334987
HHCS 1" x 3"
11
3
335166
Machine Bushing
1" x 10 ga
12
1
330597
Hex Nylock Nut 1"
13
1
433946
Safety Chain 21,000#
Axle
The carts are all equipped with an adjustable axle. This enables the operator to set the tire track to
match the row spacing of his crops. The factory settings are at 120", 144" and 152". New holes
may be drilled in the axle for intermediate settings if the owner desires.
Axle Adjustment
The axle is shipped in the 120" setting. To extend the axle, block up one side of the cart off the
ground, being very careful that the blocks used are sturdy and safely placed. Loosen the bolts
running through the axle and remove them. Pull the axle to the next hole setting and replace bolt.
Make sure the bolts are torqued to specification. (See torque chart). Repeat procedure for the
other side of the cart.
