ENGLISH
INSTALLATION
Please refer to the following suggestions to ensure proper results and best performance:
1. Choose a location which offers none or just a minimum of obstacles between the components and
your ears. Please observe at thereto, the positions of the driver’s seat, the headrests and other
constructions of the inside of vehicle interior.
2. Mount the left and right speakers in the same array on each side, which means that they are installed
at the same height and directly across from each other. Do not install one speaker higher, lower, further
forward or further back from the opposite speaker.
IMPORTANT
Please observe the correct polarity (+ and –) of all connections.
TO THE SPEAKER OUTPUTS
OF THE AMPLIFIER
INLINE-
CROSSOVER
TWEETER
WHITE
BLACK
INPUT
OUTPUT
TWEETER INTERCONNECTION
• Connect the positive jacks (”white”) and the negative jacks (”black”) of the tweeters with the according
not occupied cable plugs of the inline crossover, which lead out from the ”OUTPUT” marked position.
INLINE-CROSSOVER INTERCONNECTION
• Connect the positive terminals (”+”) and the negative terminals (”–”) of the amplifier speaker outputs
with the according cables, which lead out from the ”INPUT” marked position.
Repeat all three steps for the channel pair on the opposite side of the vehicle.
IMPORTANT: Never run the tweeter without the included inline-crossover.