Section 3
3-2
430 Sports Coupe
HELM PANEL LAYOUT
1 - Spotlight Controls
The spotlight is controlled from the keypad mounted at the helm.
“Tortoise” (SLOW) - Press Tortoise to select slow light movement.
“Hare” (FAST) - Press Hare to select fast light movement.
DIRECTIONAL MOVEMENT - The center directional buttons move
the light beam.
(UP),
(DOWN),
= port and
= starboard.
Refer to the Spotlight owner’s manual that is included in the Skipper’s
Kit for a detailed description of the functions.
2 - Engine Display Screen
Refer to the engine display screen owner’s manual that is included in
the Skipper’s Kit for a detailed description of the functions.
3 - 12-Volt Accessory Receptacle
These receptacles provide 12-volt DC power to portable accessories
such as cellular telephones.
4 - Stereo Remote
Refer to the Stereo owner’s manual that is included in the Skipper’s
Kit for a detailed description of the functions.
5 - Auto Pilot Control Head
Refer to the Auto Pilot owner’s manual in the Skipper’s Kit for a
detailed description of the functions.
6 - VHF Radio
Refer to the VHF Radio owner’s manual in the Skipper’s Kit for
complete details.
7 - E-Plex Switch
These switches will illuminate green when they are functioning and
red when there is a fault. Some switch functions are identified with
symbols, which are explained below. The switches are identified from
port to starboard.
“Anchor
,
Anchor
” -
This switch operates the windlass. The
“Anchor” switch must be powered before the
(raise) or
(lower)
switch will work. DO NOT continue to operate the switch once the
anchor is completely up; damage to the windlass system can occur.
“Anchor”- This switch provides power to the windlass system.
BILGE - This switch controls the engine room lighting.
BRDNG - This switch controls the boarding lighting.
CRTSY - This switch controls the courtesy lighting.
WHITE / RED - This switch controls the bridge and cockpit floor
lighting.
“Light and Arrow” – This switch controls the helm gauge lighting
(dimmer).
“Light, Boat and Anchor” – (Navigation Lights) this is a three-position
switch. The top position turns the navigation lights on, the center
position of the switch is off and the bottom position is anchor/mooring
position
“Boat with Water and Arrows” - These switches manually control the
designated bilge pumps (forward, midship and aft).
= ON / OFF
Downloaded
from
CruisersOwnersForum
http://www.CruisersOwnersForum.com
