© 2017 CrucialTrak Inc. All right reserved.
Page |
23
3.1.5.
WIEGAND IN: This product can be used by connecting with RF-Card Reader.
Use the "Wiegand In" terminal to pass the information that the RF-Card Reader
has to the main controller. Connect the pin # 22/24/26/28 of the "Terminal block"
of this product to the RF-Card Reader.
3.1.6.
In addition, third-party products that use Wiegand communication can be used.
Figure 12 BACS
TM
Wiegand in
3.1.7.
Sensor: The figure below shows how this product controls sliding automatic
doors and related devices. Connect cables from the door contact, door sensor,
exit button, and infrared sensor as shown below.
Figure 13 BACS
TM
Sensor connection
