Data Express DE110 SATA 6G Quick Start Guide
b. Use the provided flathead screwdriver to select the display ID number (see Figure 1). Rotating the
switch will cycle the display through 1-9 and A-F.
c. Power off the frame with the provided Data Express Key by inserting it into the lock and turning
it 90 degrees clockwise.
3 Drive Installation
a. If the carrier is locked into the frame, insert a Data Express Key into the lock and turn it 90
degrees clockwise.
b. Pull the carrier from the frame.
c. Use a Phillips screwdriver to remove the two screws on the rear of the carrier that are securing
the cover. Then remove the cover.
d. Insert your 2.5-inch or 3.5-inch drive into the carrier and use four of the provided Phillips #6-32
flat head screws to secure it.
e. Replace the drive carrier cover and secure it using the screws you removed in Step 3c.
4 Operating Your DE110
4.1 Basic Operation
a. Slide the DE110 carrier into the frame.
b. Insert the provided Data Express Key into the keylock and turn it 90 degrees counterclockwise to
secure the carrier to the frame and power on the drive inside.
Your DE110 removable drive enclosure is now ready to use! If the drive inside is already formatted, it
can be used right away. If the drive is brand new or its format is not compatible with your computer, the
drive will need to be formatted before being used.
Formatting a drive will erase all data on the drive, so be sure to back up your data before
beginning this operation.
4.2 Safe Carrier Removal
a. Turn off the computer or properly dismount the drive from the system. To dismount the drive,
ensure there are no file transfers in progress and the amber Drive Activity LED is off before
turning off the DE110, or use a third party SATA hotswap utility.
b. If the carrier is locked into the frame, insert a Data Express Key into the lock and turn it 90
degrees clockwise.
c. Remove the carrier from the frame.
3
