Data Express DE110 SATA 6G Quick Start Guide
1 General Information
1.1 Identifying Parts
1.2 Indicator Behavior
Indicator
Color
State
Description
Drive Activity
Blue
Blinking
The drive inside the carrier is being accessed by your computer.
2 Frame Installation
a. Slide the receiving frame into an open 5.25-inch bay.
b. Use a Phillips screwdriver to secure the receiving frame to the chassis with the provided screws. If the
bay appears too large, you can position an included spacer plate in between the frame and the chassis
on each side before you secure the frame to the chassis.
c. Attach a SATA data cable to the SATA port on the rear of the receiving frame and the other end to the
corresponding SAS or SATA port on the computer’s motherboard.
d. Attach a SATA power connector from your computer to the SATA power port on the rear of the
receiving frame. If no SATA power connectors are available, attach the included Molex-to-SATA
adapter cable to a Molex power plug. Then plug the SATA end of the adapter cable into the rear of
the receiving frame.
Optional: Display ID Selection
The Display ID on the front of the frame is for
display purposes only and does not provide any
other functionality. To set it, follow these instruc-
tions.
a. Insert the provided Data Express Key into
the keylock and turn it 90 degrees counter-
clockwise to power on the frame.
2
Display ID
Select Switch
Drive Carrier
Guide
Figure 1.
Display ID Switch Location
Front
Display ID &
Drive Activity LED
Frame
Carrier Handle
Rear
SATA Power and
Data Connectors
Keylock
Carrier
