CRT SS 6900, User Manual

Page: 5 / 22

Avoid exposing the transceiver to temperatures below -30 ° C. and above +60 ° C, the temperature of the dash-
board inside a vehicle can sometimes exceed 80 ° C, which can damage irreparable damage to your machine in
case of prolonged exposure. Not exposed to prolonged direct sunlight or place it near heaters.
Do not place anything on top of the apparatus that would interfere with cooling
Check that your battery is sufficiently charged to avoid rapidly exhausting its resources.
It is important to turn off your device before starting the vehicle to avoid damage caused by spikes in the ignition.
When replacing the fuse, you must use a fuse 10A 250V type F
In no case a higher value!, Otherwise a fire hazard.
If an abnormal odor or smoke is detected coming from the transceiver, turn OFF the power immediately.
Contact an CRT service station or your dealer.
Do not transmit with high output power for extended periods; the transceiver may overheat.
Keep out from children.
Attention:
• Before using your transceiver please connect an antenna on the connector PL on back side then check the
SWR before emitting. A too important SWR can entail the destruction of the transistors of power which are not
flatware by the guarantee