RFBA & RFBA Plus User Manual
Crown Broadcast
Page 33
Network->SNMP (Simple Network Management Protocol)
The SNMP Setup page,
, allows the user to configure the SNMP Type and Manager for Trap
messages. Additionally available on this page is the MIB file that you may need to load for your SNMP
Manager. The MIB file will download as a highly-compressed .zip file, and can be extracted using any
standard ZIP program. The options available via SNMP are documented within the MIB file itself, and
can be viewed using any standard MIB Browser. The RFBA currently supports both V1 and V2 of SNMP.
Figure 24 - Device Setup -> Network -> SNMP
System
The System Setup page,
, displays the same information as the Appliance Home page, but also
includes the input method for the user-selectable timeout values and software keys to add features
such as the Modulation
Monitor
.
The Main Screen Timeout and Screen Lockout Time both offer 3 pull-down choices, OFF, 1 minute, and 5
minutes. Details on these features can be found in the
Software keys are 128-bit values represented by 4 groups of 8 hexadecimal characters. Demo keys are
available to enable the Modulation
Monitor
for evaluation purposes. A demo key can be requested by
contacting Crown Broadcast with the contact information found on the
Contact Information Section.
