background image

26. When transporting or storing the fireplace and cord, keep 

in a dry place, free from excessive vibration to avoid 

damage to the fireplace. 

27. WARNING: In order to avoid overheating, do not 

cover the fireplace. 

28. This fireplace is not intended for use by persons 

(including children) with reduced physical, sensory or 

mental capabilities, or lack of experience and knowledge, 
unless they have been given supervision or instruction 

concerning use of the fireplace by a person responsible for 

their safety. 

29. Children should be supervised to ensure that they do not 

play with the fireplace. 

30. Indoor and household use 
31. CAUTION: In order to avoid a hazard due to inadvertent 

resetting of the thermal cutout, this fireplace must not be 

connected to an external switching device, such as a timer, 
or connected to a circuit that is regularly switched on and 
off by the utility. 

32. Do not use this apparatus near water. 
33. Protect the power cord from being walked on or pinched 

particularly at plugs, convenience receptacles, and the 
point where they exit from the apparatus. 

34. Only use attachments/accessories specified by the 

manufacturer. 

35. This unit is not intended for use by persons (including 

children) with reduced physical, sensory or mental 
capabilities or lack of experience or knowledge. They 

should be given appropriate supervision and instructions 
about the use of the unit by a person responsible for their 
safety. 

36. Close supervision is recommended when using this unit 

near young children. 

SAVE THESE INSTRUCTIONS 

Summary of Contents for QR-23












Reviews: