INSTALLATION & OPERATION MANUAL 10091 REV 0 (05/21)
PAGE
9
OF16
Electric Power Tilt Skillets
C
leaning
C
leaning
WARNING
Disconnect the power supply to the appliance before cleaning or servicing.
Before cleaning allow the tilting braising pan to cool and then clean it. Keep exposed cleanable areas of the tilting braising
pan clean at all times. Do not get water in electrical box or any electrical component.
1. Thoroughly wash pan, pouring spout (see Figure 2), lid and exterior surfaces with detergent and warm water. If
necessary, soak pan to remove food that is stuck to pan surface. Rinse thoroughly and wipe dry with a soft clean
cloth.
2. Clean removable strainer and receiving pan support (Figure 2) with detergent and warm water. Rinse thoroughly and
wipe dry with a soft clean cloth.
WARNING
Never spray water into electric controls or components!
CAUTION
Do not use cleaning agents that are corrosive.
WARNING
The equipment and its parts are hot. Use care when operating, cleaning and servicing.
