INSTALLATION & OPERATION MANUAL 10091 REV 0 (05/21)
PAGE
14
OF 16
Electric Power Tilt Skillets
T
roubleshooting
T
roubleshooting
IMPORTANT
NOTICE
Your skillet is equipped with a thermally protected motor which raises and lowers the pan. Continuous operation
of 8 or more cycles may cause the motor to overheat and shut down. Should this occur wait approximately 15 to
20 minutes for motor to cool. Motor should then be ready for operation. To avoid this occurring DO NOT run motor
continuously for more than a few cycles.
Heating Elements Do Not Come On
:
1. Power supply not “ON”.
2. Pan not in down position.
3. Defective thermostat or elements.
4. Defective limit switch or activator mechanism.
5. Defective contactors.
Pan Will Not Operate
(Up or Down)
:
1. Power supply not “ON”.
2. Motor has overheated and thermal overload has shut down motor. Wait 15 to 20 minutes and try again.
The gear reducer is sealed and permanently lubricated with a high grade synthetic grease.
