Crown DC-300A, Instruction Manual, Page: 7 / 42

1.2 SPECIFICATIONS
1.2.1 STEREO SPECIFICATIONS
Output Power
Frequency Response
1 KHz Power
Harmonic Distortion
I.M. Distortion
(60Hz-7KHz 4:1)
Slewing Rate
Damping Factor
Output Impedance
Load Impedance
Voltage Gain
Input Sensitivity
Output Signal
155 watts per channel minimum RMS (both channels oper-
ating) into an 8 ohm load over a bandwidth of 1 Hz-20KHz at
a rated RMS sum total harmonic distortion of 0.05% of the
fundamental output voltage.
±0.1dB DC-20KHz at 1 watt into 8 ohms; ±ldB DC-100KHz.
180 watts RMS into 8 ohms, per channel, both channels operating, 0.1% total harmonic distortion.
Less than 0.001% from 20Hz-400Hz. and increasing linearly to 0.05% at 20KHzat 155watts RMS
per channel into 8 ohms.
Less than 0.05% from 0.01 watts to 0.25 watts and less than 0.01% from 0.25 watts to 155watts
into 8 ohms, per channel.
8 volts per microsecond (slewing rate is the maximum value of the first derivative of the output
signal, or the maximum slope of the output signal).
Greater than 750, DC-400Hz into 8 ohms.
Less than 7 milliohms in series with less than 3 microhenries.
Rated for 8 ohm usage; safely drives any load Including completely reactive loads.
20.6±2% or 26.3±0.2dB at maximum gain.
1.75 volts±2% for 155 watts into 8 ohms.
Unbalanced, dual channel.