page 6
CT16S 16-Channel Amplifier Switcher
Operation Manual
CT16S
16通道主备功放切换器
操作手册
1 Welcome
The Crown
®
CT16S Amplifier Switcher gives end users confidence that their public address system is operating as
designed. The CT16S has 16 primary amplifier inputs (which connect to the amplifier outputs), 16 backup amplifier
inputs (which connects to the amplifier outputs), and 16 speaker outputs. The CT16S can be connected to the Hi-Z ouput
(70V/100V) of amplifier and capable of handling maximum 2A continuous current for each channel.
This switcher can be used to back up channels or amplifiers in a public address system. The management software sys-
tem is needed to monitor, control, and report all operations that CT16S performs in the system. Configuring the CT16S
can only occur with the management software. For details about the software package, please consultant your Harman
distributor or representative.
A series of programmable GPIO’s can be used to connect the CT16S to external control devices. A total of 16 control
inputs and 5 control outputs are built into the CT16S to provide enough control inputs for third party use. In addition to
the GPIO, an Ethernet connector is provided for additional configuration and control.
Please take the time to study this manual so that you can obtain the best possible service from your amplifier switcher.
1
欢迎
Crown
®
CT16S主备功放切换器增强了用户对公共广播系统稳定运行的信心。CT16S具有16路主功
放输入（连接到功放输出）、16路备用功放输入（连接到备用功放输出）和16路输出（连接到扬
声器输入回路）。CT16S每通道能支持Hi-Z（70V/100V）最高2A连续电流。
此主备功放切换器在公共广播系统中用于备份通道或功放。所有CT16S在公共广播系统中的操作
需要管理软件监控、控制和记录。只能使用管理软件中配置CT16S。有关软件包的详细信息，请
咨询您当地的经销商或销售代表。
您可通过本功放切换器上的可编程控制输入输出接口将CT16S与外部控制设备相连。CT16S设计有
16路控制输入和5路控制输出，为第三方提供足够的控制输入。除了控制输入输出接口，CT16S还
提供以太网接口，用于其它配置和控制。
请仔细阅读本手册，以获取本产品最佳效能。
Summary of Contents for ct16s
Page 28: ......
