background image

Commercial Audio Series

 

Mixer-Amplifi ers

Operation Manual

page 16

7 Warranty

UNITED STATES & CANADA

SUMMARY OF WARRANTY

Crown International, 1718 West Mishawaka 
Road, Elkhart, Indiana 46517-4095 U.S.A. 
warrants to you, the ORIGINAL PURCHASER 
and ANY SUBSEQUENT OWNER of each 
NEW Crown product, for a period of three 
(3) years from the date of purchase by the 
original purchaser (the “warranty period”) 
that the new Crown product is free of 
defects in materials and workmanship. We 
further warrant the new Crown product 
regardless of the reason for failure, except 
as excluded in this Warranty.

Warranty is only valid within the country 
in which the product was purchased.

ITEMS EXCLUDED FROM THIS 
CROWN WARRANTY

This Crown Warranty is in effect only for fail-
ure of a new Crown product which occurred 
within the Warranty Period. It does not 
cover any product which has been damaged 
because of any intentional misuse, accident, 
negligence, or loss which is covered under 
any of your insurance contracts. This Crown 
Warranty also does not extend to the new 
Crown product if the serial number has been 
defaced, altered, or removed.

WHAT THE WARRANTOR WILL  DO

We will remedy any defect, regardless of the 
reason for failure (except as excluded), by 
repair, replacement, or refund. We may not 
elect refund unless you agree, or unless we 
are unable to provide replacement, and repair 
is not practical or cannot be timely made. If 
a refund is elected, then you must make the 

defective or malfunctioning product avail-
able to us free and clear of all liens or other 
encumbrances. The refund will be equal to the 
actual purchase price, not including interest, 
insurance, closing costs, and other fi nance 
charges less a reasonable depreciation on the 
product from the date of original purchase. 
Warranty work can only be performed at our 
authorized service centers or at the factory. We 
will remedy the defect and ship the product 
from the service center or our factory within a 
reasonable time after receipt of the defective 
product at our authorized service center or our 
factory. All expenses in remedying the defect, 
including surface shipping costs in the United 
States, will be borne by us. (You must bear 
the expense of shipping the product between 
any foreign country and the port of entry in the 
United States including the return shipment, 
and all taxes, duties, and other customs fees 
for such foreign shipments.)

HOW TO OBTAIN WARRANTY       
SERVICE

You must notify us of your need for warranty 
service within the warranty period. All 
components must be shipped in a factory 
pack, which, if needed, may be obtained from 
us free of charge. Corrective action will be 
taken within a reasonable time of the date of 
receipt of the defective product by us or our 
authorized service center. If the repairs made 
by us or our authorized service center are 
not satisfactory, notify us or our authorized 
service center immediately.

DISCLAIMER OF CONSEQUENTIAL 
AND INCIDENTAL DAMAGES

YOU ARE NOT ENTITLED TO RECOVER FROM 
US ANY INCIDENTAL DAMAGES RESULTING 
FROM ANY DEFECT IN THE NEW CROWN 
PRODUCT. THIS INCLUDES ANY DAMAGE 
TO ANOTHER PRODUCT OR PRODUCTS 
RESULTING FROM SUCH A DEFECT. SOME 
STATES DO NOT ALLOW THE EXCLU-
SION OR LIMITATIONS OF INCIDENTAL OR 
CONSEQUENTIAL DAMAGES, SO THE ABOVE 
LIMITATION OR EXCLUSION MAY NOT APPLY 
TO YOU.

WARRANTY ALTERATIONS

No person has the authority to enlarge, amend, 
or modify this Crown Warranty. This Crown 
Warranty is not extended by the length of time 
which you are deprived of the use of the new 
Crown product. Repairs and replacement parts 
provided under the terms of this Crown War-
ranty shall carry only the unexpired portion of 
this Crown Warranty.

DESIGN CHANGES

We reserve the right to change the design 
of any product from time to time without 
notice and with no obligation to make cor-
responding changes in products previously 
manufactured.

LEGAL REMEDIES OF PUR-
CHASER

THIS CROWN WARRANTY GIVES YOU 
SPECIFIC LEGAL RIGHTS, YOU MAY ALSO 
HAVE OTHER RIGHTS WHICH VARY FROM 
STATE TO STATE. No action to enforce this 
Crown Warranty shall be commenced after 
expiration of the warranty period.

THIS STATEMENT OF WARRANTY SUPER-
SEDES ANY OTHERS CONTAINED IN THIS 
MANUAL FOR CROWN PRODUCTS.    9/07

Summary of Contents for 135MA

























Reviews: