DriveCore Install Network Display Series
Power Amplifiers
Operation Manual
page 20
Software System Configuration
Cascading Inputs
Cascading the analog inputs, or "Y-ing channels" gives more flexibility to the installation of this amplifier (See Figure 16). One input can be used to drive some or all of the
amplifier outputs. NOTE: By cascading the inputs, the corresponding input DSP functions for individual channels will be removed and only the output DSP functions will be
available (See Figure 17).
Figure 16 Use the "Y 1+2" etc. check boxes to cascade channel inputs.
Figure 17 With the "Y 1+2" box checked, both output Ch.1 and Ch.2 are fed by input Ch.1 and input processing is organized accordingly.
