INSTALLATION AND OPERATION MANUAL, ROUND GAS COUNTER TILTING SKILLET,
MODEL GCTRS-16
PART NUMBER 10007R1
9
2004-06-23
4.0 PERIODIC MAINTENANCE
NOTICE: Contact the factory, the factory representative or local service
company to perform maintenance and repairs.
NOTICE: As a safety precaution, disconnect the power supply
during cleaning or servicing.
CLEANING
CAUTION: Do not use cleaning agents that are corrosive.
The gas fired tilting skillet should be cleaned after each use.
1.
Keep exposed cleanable areas of unit clean at all times.
2.
Thoroughly wash pan and lid. If necessary soak pan to remove product that is stuck to
pan surface. Use mild detergent and water.
3.
Clean around burner air mixer and orifice if lint has accumulated. Bottom cover must be
removed to clean this area.
4.
Rinse entire unit and dry. Do not get water in electrical box or any electrical component.
ADJUSTMENTS
WARNING: At least twice a year, have an authorized service person
clean and adjust the unit for maximum performance.
All units are adjusted at the factory. In case of problems in operation at initial installation, check
type of gas and manifold pressure and compare it with information on rating plate.
