manualshive.com logo in svg

Crowcon I-Test, User'S Operation Manual, Page: 47 / 125

Share
Download
Crowcon I-Test User'S Operation Manual Download Page 47

47

3.8 

I-Test save configuration options

When I-Test is initially powered it will perform a purge cycle for approximately 30 seconds, during this 

time I-Test Manager cannot be used to connect to I-Test and the message below will be displayed.

Figure 28: System busy message

Once the full I-Test configuration has been created it can be saved by clicking on 

Save Configuration

.

There are three save options available (see 

Figure 29

):

•  Save to I-Test (see 

page 48

)

•  Save to database (see 

page 50

)

•  Save to USB Memory Stick (see 

page 52

)

 i

At this point, clicking the Back button will revert back to the configuration file.

Figure 29: 

Save Configuration screen

Contents

Exit

Unpacking

Set-up

Operating I-Test

I-Test 

Manager

Configuring 

I-Test

Warranty

Overview

Contacts

Appendices

Troubleshooting

Specification

Summary of Contents for I-Test






























































































































Reviews:

No comments