Crowcon I-Test, User'S Operation Manual, Page: 48 / 125

48
3.8.1 Save to I-Test
This option will allow the full configuration to be saved directly to an I-Test connected via the USB
port (downloaded).
The save configuration screen will show an icon for the connected I-Test and also display the serial
number.
X
Click Save to I-Test . The Select items to save dialogue box will be displayed (see Figure 30 ).
X
The user can then determine which configuration items should be saved to I-Test.
X
If it is required to maintain some of the current settings in I-Test, this option will allow selected
configuration items to be uploaded whilst preserving other settings.
Figure 30: Select items to save screen
X
The selectable items to save correspond to each of the I-Test configuration pages. Activate each
tick box to select which configuration items are to be saved to I-Test.
De-select All: Will deselect all individual tick boxes.
Select All: Will select all individual tick boxes.
Contents
Exit
Unpacking
Set-up
Operating I-Test
I-Test
Manager
Configuring
I-Test
Warranty
Overview
Contacts
Appendices
Troubleshooting
Specification