CROW ELECTRONIC ENGINEERING LTD. FW2-KP Series, User Manual

Page: 9 / 11

7
Maintenance
Low Battery Indication
On the display there is an icon of battery, while the battery is low
Replacing the FW2-KP Batteries

Enter to installer mode in the Runner2

Release the screw and pull the keypad from the bracket.

Replace the batteries with fresh ones and close the unit.

Verify “Low Bat” restored.
Erasing the FW2-KP.
In case of FW2-KP need to be replaced, the registration of the FW2-KP should be cleared.
To clear the FW2-KP registration, follow the next steps.

Remove the batteries from the FW2-KP.

Press continuously on buttons PROG and 0 and insert one battery..

Keep pressing until beep heard.

Release the Buttons

The registration is cleared.

The display will present ”Keypad isn’t learned press P+ENTER”.
Erasing the Transceiver Memory.
In case of replacing or removing one FW2-KP from the installation, the memory of the
Transceiver should be cleared.
To clear the Transceiver memory, follow the next steps:

Turn off the power of the Transceiver.

Press continuously on Learn button and then power-up the Transceiver.

Keep pressing until the Blue LED will blink fast 3 times.

Release the Learn Button

Memory clear complete.