3
Zion Floor Standing Furniture
Step 5
Step 6
Basin Installation
a: Attach the tap to basin and
carefully bed in the waste using
silicone only.
b: Carefully apply silicone to the
top edges of the unit.
Inserting the drawer:
Place the drawer on the
extended slides.
Push the drawer fully home.
Drawer engages automatically!
Note:
Basin waste and taps fittings when over tightened can
create stress within the basin material which may in time
cause the failure of the product. Waste fittings should be
carefully bedded in silicone and the back-nut hang tightened
a
b
c
c: Carefully position the basin
down onto the unit, ensure it is
centrally positioned and flush
at the back.
Connect the tap and waste.
Apply silicone to the join
between the basin and wall and
down sides of the unit.
Leave silicone, 24 hours to dry.
an additional quarter turn using a suitable spanner is sufficient to
create the required water light seal. Care should also be taken
when fitting brassware to tap platforms in order to prevent similar
stress related failures.
