2
Zion Floor Standing Furniture
INSTALLATION INSTRUCTIONS
Two Drawers Basin Unit & Basin Installation -
600-700-1200 Basin Unit
Step 1
Step 3
Step 4
Step 2
860mm -
870mm
Remove the drawers
Remove the drawer before installation.
‘Wall bracket’ installation
a:
Place the unit on the furniture site
b:
Mark the bracket fixing holes onto the wall. Drill Ø 8mm
holes, insert the wall plugs supplied on solid walls, use
suitable wall fixings for dry-wall (not supplied).
Important:
If the basin unit and/or basin are not fitted level
this may result in the basin not draining correctly.
Height Adjustment
When the furniture is fixed to the wall, it can be adjusted if
necessary.
a:
To adjust the furniture, turn the adjustment screws, located
on the bottom of the furniture, until the furniture is completely
straight.
Plan unit position: Basin
Decide on the position of the unit.
Pull out the drawer to its full extension,
gently squeeze the locking levers
outwards on both sides and pull the
drawer off the runners at the front.
