Page 1: ......
Page 2: ...45 45 45 Where valves are required to be installed in accordance with TMV2 or TMV3 requirements please install them strictly in accordance with the separate Instruction Manual supplied with this unit ...
Page 3: ...an be temporally attached to the valve with the screws supplied This will protect the valve while the rest of the work is completed see fig 1 Remove Hot and Cold check valves and flush out the installation clean the filters and refit Apply a narrow bead of clear silicone sealant around the back edge of the cover plate and carefully press into position Fit the control knobs by lining up the flat su...
Page 4: ......
