2
INSTALLATION INSTRUCTIONS
Basin & Basin Unit Installation
Step 1
Step 3
Step 2
Removing the drawer
Pull the drawer out, lift slightly
aprox. 10 cm before the limit stop.
‘Wall bracket’ installation
Use the measurements above, to position the ‘wall brackets’.
a: Important:
The measurements given
above are the maximum the brackets can
be spaced apart, the brackets must fit
within that measurement.
b:
Mark the bracket fixing holes onto
the wall. Drill Ø 8mm holes, insert the
wall plugs on solid walls and attach the
brackets
Important:
If the basin unit and/or basin are not fitted level
this may result in the basin not draining correctly.
Position the unit on the brackets.
Plan unit position
Decide on the position and height of the unit. The
recommended basin height is between 860 and 870mm from
floor to top of basin.
65
438-638-938 mm
Pull firmly horizontally until
the drawer audibly disengages,
then lift off.
b
c
Removing bracket from the wall
a
Glide II Furniture 02/2020