crossvac x500, User Manual, Page: 27 / 30

x500 - Central Vacuum System
User guide
English
8. CLEANING AND MAINTENANCE
The effectiveness of the central vacuum unit and its optimum performance is dependent on its correct
use and maintenance. It is recommended that cleaning and maintenance is undertaken on a regular
basis to prevent mechanical breakdowns.
The central vacuum unit must be disconnected from the electrical supply.
1. Detach the container by unfastening the clamps.
2. Remove the Cyclonic Filter.
3. Empty the dust container.
4. Ensure the Cyclonic Filter is repositioned correctly.
8.1 EMPTYING THE DUST CONTAINER
8.2 CLEANING AND MAINTENANCE OF THE FILTER HEPA +
PRO-TECTA
1. Detach the container from the central vacuum unit.
2. Access the protective filter located inside and remove it by turning it
90 º anti-clockwise.
3. Remove both the cartridges together.
4.This protective filter is re-useable and can be washed using neutral
soap and water. Wait until it is completely dry before refitting it.
5.To access the Hepa filter follow the same procedure as for the
protective filter and wash in the same way. Don’t forget to wait until the
filter is dry before refitting it.
6. Check that both filters are in perfect condition. Never refit damp or
damaged filters. Also, please note that to use the central vacuum unit
without filters would damage it.
7.Re-position the Hepa filter inside the Pro-Tecta filter and fit both filters
together by turning the handle clockwise to lock the filters in place
8. Re-fit the central vacuum dust container.
26