16
Driver model turn switch
1.4WD/4WD-Lock
2.4WD/2WD
When change from 2WD/4WD/4WD-Lock
model, should be stop the ATV,
and set
the switch to correspond position.
To achieve maximum traction while riding in 2WD
or 4WD,
the two rear wheels are mounted solidly
on one axle and turn together at the same speed,
Furthermore,
when
riding
in
4WD-LOCK(“DIFF-LOCK”),the front wheels also
turn together at the same speed.
Therefore,
unless the wheel on the inside of the turn is
allowed to slip or lose some traction, the ATV will
resist turning. A special turning technique must be
use to allow the ATV to make turns quickly and
easily. It is essential that this skills be learned first
at low speed.
Summary of Contents for 500ATV
