background image

CCpilot X900 

 

 

Revision 1.1 

Technical Manual  

   

 

2020-02-03 

www.CrossControl.com 

15

30-75           54-44           64-54 
75-400         44-55           54-65 
400-1000        55                65 

Enclosure 

EN 60529 

IP65 

 
Tests are performed with 24 V power level. The environmental tolerance may be affected by 
external factors like mounting and shielded cables etc. 
 

7.3.

 

Weight and Dimensions 

 

Enclosure  

Size (mm) 

Weight (Kg) 

 

267 x 166 x 57 

 
 

 

 
 

8.

 

Technical support 

Contact your reseller or supplier for help with possible problems with your device. In order to get 
the best help, you should have your device in front of you and be prepared with the following 
information before you contact support.  

 

Part number and serial number of the unit, which you can find on the identification label.  

 

Date of purchase, which is found on the invoice. 

 

The conditions and circumstances under which the problem arises. 

 

Error codes signalled by the status LED 

 

Possible error messages which are shown. 

 

Device log files (if possible). 

 

Information regarding possible external equipment which is connected to the device. 

Summary of Contents for CCpilot X900

















Reviews: