SHARK User Manual
12
Install the battery
Line up the contacts of the battery and the battery compartment, and then insert the
battery.
Charge the battery
•
Charge with the provided travel adapter
1. Connect the charger to an ac wall outlet.
2. Connect the plug from the charger to the jack on the bottom of the phone.
The battery indicator bar starts scrolling.
If Not charging is displayed, wait for a while, disconnect the charger, plug it in
again, and retry.
3. When the battery is fully charged, the bar stops scrolling. Disconnect the
charger from the phone and the AC outlet.
•
Charge with a PC data cable
1. Plug one end (micro
‐
USB) of USB data cable into the phone USB jack.
2. Plug the other end of the USB cable into a USB port on a PC.
Note:
Depending on the type of PC data cable you are using, it may take
some time before charging begins.
3. When the battery is fully charged (the battery icon is no longer moving),
unplug the USB cable from the device and then from the PC.
Notes:
-
Make sure to charge the battery fully for the first time usage. Remove the data
cable after charging.
