15
Standby
time
too
short
When failing to connect to network, the phone will keep searching
base station that consumes much battery and reduces standby time.
Move to an area with stronger signal strength or switch your phone
off temporarily.
Replace the battery.
SIM card error
Make sure that the chips in SIM card are not damaged; use the clean
cloth to scratch it.
Make sure that SIM card is inserted correctly.
SIM card invalid. Contact your service provider.
Can not dial calls
Make sure that the number you dialed is available and the dial key
has been pressed.
Make sure that there is enough money to make a call.
Make sure that SIM card is valid.
Fixed Dial is set or has call barring feature turned on. Deactivate
fixed dial function or call barring.
Can not receive calls
Make sure that your phone has connected to network (Check if the
network is too busy or invalid).
Make sure that there is enough money to receive the call.
Make sure that SIM card is valid.
Check call divert settings and incoming call barring settings.
The
battery
won’t
charge
Make sure that the battery is inserted correctly. Securely connect the
charger to the phone.
Only charge the battery in an environment where the temperature
does not go below -10
℃
or above 55
℃
.
The battery or charge need to be changed.
Can not set some
functions
The operation is wrong.
The network providers do
not support the function, or you don’t apply
the function.
Safety and General Information
Read these guidelines before using your wireless phone. Failure to comply with them
may be dangerous or illegal.
1.1
General Precautions
1)
Mobile Phone
Please use the phone at a temperature of -10
℃
~55
℃
and a relative humidity of
35%~85%.
Avoid using the phone near regular telephone, television, radio and automatic office
equipment, as they may interfere with one another.
Please keep the removable SIM card out of the reach of children as there is a risk
they could swallow it.
2)
Battery
Please put the battery in a cool and well-ventilated place out of direct sunlight.
Batteries have life cycles. If the time that the battery powers equipment becomes
much shorter than usual, the battery life is at an end. Replace the battery with a new
Summary of Contents for Element
Page 1: ......
Page 7: ...5 5 Insert the battery 6 Insert the battery cover ...