55
EN
Switching the phone on and off
Press and hold the phone's
On/Off
button
and wait a few seconds until the display
turns on.
When you switch on your phone for the first time or after performing a data reset, follow
the on-screen instructions to set up your device.
Once the phone is on, this button can also be used to:
•
Lock/Unlock your touch screen with a single short press
•
Access emergency calls, switch off or restart your phone with a long press.
Tips and precautions for charging your battery
1.
Open the dust cap and connect the cable and AC adapter
supplied in your pack using the USB-A port. Then plug the
other end of the cable into the USB-C port on your phone.
2.
Plug the AC adapter into an electrical outlet.
3.
When the battery is fully charged, unplug the phone from
the charger. First unplug the charger from the device, then
unplug it from the electrical outlet.
Never charge your phone using the X-LINK
TM*
magnetic connection and the USB
connection together, as this could shorten the lifespan of your phone's equipment.
The battery is built into the phone and is not removable. Do not remove the battery
yourself.
• To avoid prematurely draining the device's battery, we recommend that you follow the
battery charging instructions for each charging cycle. To do this, it is better to top
up the battery when it reaches 20% and avoid charging it beyond 80%, rather than
topping it all the way up to 100% from zero.
*Magconn Technology
Summary of Contents for CORE-M5
Page 1: ...CORE M5 ...
Page 92: ...V 2021 09 21 ...
