Crosscall ACTION-X5, Quick Start Manual, Page: 13 / 90

13
EN
X-LINK
TM*
THE SMART MAGNETIC ATTACHMENT SYSTEM
This magnetic connector on the back of your smartphone
can be used to attach and connect your smartphone to
exclusive X-LINK
TM*
accessories in a single action. Depending
on the accessories, the X-LINK TM* can charge your phone or
transfer data.
(*Magconn Technology)
X-BLOCKER
In situations that require maximum hold, this exclusive
accessory supplied with your phone guarantees secure
attachment for your smartphone to compatible
accessories. It is easily attached to the slots on the side of
your mobile. The silicone coating reduces vibrations
caused by knocks.
Discover the full range of accessories compatible with the X-LINK
TM*
and the X-BLOCKER on www.crosscall.com > Accessories
SECURITY MEASURES
WATERPROOFNESS
• You have just bought an IP68 international standard-compliant
mobile phone. To guarantee optimal use and watertightness,
ensure that all the flaps covering the USB connectors and the
earphone jack are correctly closed.
• Do not open the back cover of the device if it is in water or a very
humid environment.
• The rubber seals attached to the flaps are key components of the
device. Ensure that you do not damage the rubber seal when you
open or close the waterproof cap. Ensure that the seal is free from
any debris, such as sand or dust, to avoid damaging the device.
• The flaps covering the openings may come loose in the event of
a fall or knock. Ensure that all the covers are properly aligned and
completely closed.
• If the device has been submerged in water or the microphone or
Loud speaker is wet, the sound may not be clear during a call. Make
sure that the microphone or loud speaker is clean and dry by wiping
it with a dry cloth. Do not push anything sharp (toothpick, metal
object or other) into the microphone or loud speaker because this
could damage the waterproof membrane.
• If you put your phone in sea water or chlorinated water, rinse it in
fresh water.
• If the device gets wet, dry it thoroughly with a soft, clean cloth.
• The water resistance of the device can lead to slight vibrations
under certain circumstances. These vibrations, for example when
the volume is turned up high, are entirely normal and do not affect
the performance of the device.
• Temperature fluctuation can lead to an increase or decrease in the
pressure, which may affect the quality of the sound. If required,
open the watertight flaps to release the air.
• Each time the mobile phone is immersed in water, dry the inside
of the USB and JACK waterproof caps thoroughly. It is quite
possible for drops of water to remain in the caps, leading to a risk
of oxidation.