1.2 Technical Characteristics
Technical Characteristics continued on page 5...
4115-300 Manual, Rev. H
Page 4
11/16/15
±2 dB, over RF band; ± 0.5 dB, 40 MHz BW, Frequency Sense-Non-Inverting
Frequency Response
Channel Characteristics
LO Characteristics
± 0.05 ppm maximum over temp internal reference; external reference input
Frequency Accuracy
< -45 dBC for two carriers at 4 MHz spacing, each at -5 dBm out
Intermodulation
<-50 dBm, over 27.0 - 27.5 and 31.0 - 31.5 GHz Band
Spurious, Out of Band
SIGNAL RELATED <-50 dBC in band, -15 to 0 dBm out;
SIGNAL INDEPENDENT, <-55 dBm; over 27.5 to 31 GHz Band
Spurious, Inband
+2 to +8 dBm in, Monitor Output = input level ± 1.0 dB, 50 ohms
10 MHz Level In/Mon
Band Specific
LO Frequency
+ 30 ± 3 dB, (+30 to 0 dB variable in 0.5 dB Steps)
Gain @ Fc
-105
-95
-80
-75
-65
1MHz
100kHz
10kHz
1kHz
100 MHz
dBC/Hz
Phase Noise @ F (Hz) >
Controls, Indicators
Green LED
Power
Gain, band select and internal 10 MHz frequency via Ethernet,
M&C or Status/Control Connector
Gain, Band, 10M Frequency
Red LED, External Contact Closure
PLL, Alarm
TABLE 1.0
4115-300 Block Upconverter Specifications**
Band 4 - 30.0 to 31.0
+8 dBm, maximum gain
Output 1 dB Compression
Band 3 - 29.0 to 30.0
Band 2 - 28.0 to 29.0
-40 to -15 dBm
Input Level
20 dB maximum gain
Noise Figure, Maximum
0.95 to 1.95 GHz
Frequency (GHz)
>60 dB @ 0 dBm Output
Mute at Maximum Level Out
-15 to 0 dBm
Output Level Range
Output Characteristics
Input Characteristics
Band 1 - 27.5 to 28.5
Frequency (GHz)
50
Ω
/ 14 dB, Mute & Unmute
Impedance / Return Loss
50
Ω
/ 14 dB
Impedance / Return Loss
