2.2
Rear Panel Input / Output Signals -
Figure 2.2 shows the input and output connectors on the rear panel.
AC - POWER IN
AC input for switching power supply.
100-240 ±10% VAC, 47-60 Hz.
AC
GND
J5 - RF OUT
3.4 - 4.275 GHz
10.7 - 11.7 GHz
11.7 - 12.2 GHz
10.7 - 11.8 GHz
11.7 - 12.8 GHz
10.7 - 11.8
11.7 - 12.8
SMA female connector.
See Table 2.2 for other options.
J4
10 MHZ REF
OUTPUT
J10
AND
MONITOR
CONTROL
5 4 3 2 1
9 8 7 6
J10 - MONITOR AND CONTROL
DB9 female connector.
See Table 2.1.
J3
10 MHZ
EXT REF
INPUT
RF OUT
J5
J3 - 10 MHz EXT REF INPUT
10 MHz external reference input,
+2 to +8 dBm, 50 ohms,
BNC female connector
J4 - 10 MHz EXT REF OUTPUT
10 MHz external reference output,
+2 to +8 dBm, 50 ohms,
BNC female connector
J7
J2
J7 - ETHERNET
CONNECTION (Option W8)
RJ45 Ethernet Connector
RF MON
J1 - RF IN
5.85 - 6.725 GHz
12.75 - 13.75 GHz
12.75 - 13.25 GHz
13.75 - 14.85 GHz
13.75 - 14.85 GHz
17.3 - 18.4
17.3 - 18.4
SMA female connector.
See Table 2.2 for other options.
J2 - RF MONITOR
SMA female connector.
See Table 2.2 for
other options.
J1
RF IN
FIGURE 2.2 3116-T71-184 Rear Panel Inputs and Outputs
TABLE 2.1 JJ10
2.1
J10 Pinouts (RS-232C/422/485*)
Pin
Function
1
Rx-
2
Rx+ (RS-232C)
3
Tx+ (RS-232C)
4
Tx-
5
GND
6
Alarm Relay: Common
7
Alarm Relay: Normally Open
8
Not Used
9
Alarm Relay: Normally Closed
TABLE 2.2
2 IF/RF
2.
2 IF/RF Connector Options
Connector
Options
Option
IF
RF
STD
BNC, 50
Ω
Type N, 50
Ω
-S
BNC, 50
Ω
SMA, 50
Ω
-N
BNC, 75
Ω
Type N, 50
Ω
*Interface: DB-9 Female
Protocol: RS485, RS422, or RS232C (selectable),
9600 baud rate, no parity, 8 data bits, 1 start bit, 1 stop bit
3116-T71-184 Manual, Rev. B
Page 9
05/16/16
