Cross Technologies 3116-7786-2150, Instruction Manual

Page: 17 / 19

2.5.8 Alarm Indications
An alarm condition will occur if any local oscillator phase lock loop (PLL) comes out of lock.
The Mute LED will light if you select Mute and the Remote LED will light when you select the Remote mode.
NORMAL DISPLAY
PUSHING MENU/EXECUTE SEQUENCE
3116-7786-2150
Rev. 1.00
FC - 8200.000
G = +10.0 REF AUTO-I
SCROLL <>
SCROLL PUSH BUTTON
PUSH BUTTON
Power Up 1:
Power Up 2:
Normal Display
Menu 1 Set Frequency
Menu 2 Set Gain
Menu 3 Set Mute
Menu 4 Set Reference Mode
Menu 5 Set Reference Offset
Menu 6 Set Remote
Menu 7 Set Remote Interface
Menu 8 Set RS485 Address
Save? When go to end
SCROLL <>
SCROLL PUSH BUTTON
SCROLL <>
SCROLL PUSH BUTTON
R
R
R
SCROLL <>
SCROLL PUSH BUTTON
R
SCROLL <>
SCROLL PUSH BUTTON
GAIN = 30.0
MUTE = ON
REF MODE = AUTO
INTERNAL FREQ ADUST
OFFSET = -1225
INTERFACE = RS232
RS485 ADDRESS = 0
R
R
SAVE SETTINGS? Y N
SCROLL <>
SCROLL PUSH BUTTON
SCROLL <>
SCROLL PUSH BUTTON
REMOTE = ON
R
SCROLL <>
SCROLL PUSH BUTTON
= = = IP Addr = = =
192.168.123.002
ON POWER UP (1)
ON POWER UP (2)
R
FC = 8200.000
FIGURE 2.4 Menu Display and Sequences
3116-7786-2150 Manual, Rev. 0 Page 17 11/24/20