<-60 dB typical, <-50 dB min.; G=30, -30 dBm input level
Channel to Channel Isolation
-35 to -10 dBm
Input Level Range
Input Characteristics
Output Characteristics
Channel Characteristics
Synthesizer Characteristics
> 50 dB, minimum
Image Rejection
-20 to 0 dBm
Output Level Range
TABLE 1.0
2415-x02 Multi-Channel Upconverter Technical Specifications**
125 kHz (as low as 1 kHz steps available)
Frequency Step
±1.0 ppm max. over temp. (±0.01ppm, Option H)
Frequency Accuracy
Non-inverting
Frequency Sense
0.015 ns/MHz
2
parabolic; 0.05 ns/MHz linear; 1 ns ripple
Group Delay, max.
< -50 dBc, in band
Spurious Response
±1.5 dB, 950 - 2150 MHz; ±0.5 dB, 36 MHz BW; ±1.0 dB, 40 MHz BW
Frequency Response
0 to +30.0 dB in 0.5 ±0.5 dB steps
Gain Range (adjustable)
+10 dBm, maximum gain
Output 1 dB compression
950 to 2150 MHz
Frequency
75
Ω
/ 12 dB (See Table 2.2 for connector options)
Impedance/Return Loss
70 ±18 MHz
Frequency
75
Ω
/18 dB (See Table 2.2 for connector options)
Impedance/Return Loss
-97 -117
-90 -110
-80
-70
-65
-60
Standard 125 kHz steps dBc/Hz
-83
-77
-69
-67
100k 1M
10k
1k
100
10
Typical: dBC/Hz
Phase Noise @ Freq (Hz) >
19 inch, 1RU standard chassis, 1.75” high x 16.0” deep
Size
Controls, Indicators
Other
75
Ω
BNC (female), 75
Ω
BNC (female) works with 50
Ω
& 75
Ω
IF, 10 MHz Connectors
Direct readout LCD; manual or remote selection
Gain Selection
3 dBm, ± 3 dB, 75 ohms (Option -E)
10 MHz Level (In or Out)
100-240 ±10% VAC, 47- 63 Hz, 45 watts maximum
Power
RS232/RS485 selectable, Ethernet optional)
Remote
Direct readout LCD; manual or remote selection
Frequency Selection
DB9 (female) - NO or NC contact closure on Alarm
Alarm, Remote Connector
Type F (female) See table 2.2 for other options
RF Connector
Green LED; Red LED; Yellow LED
Power; Alarm; Remote
(Technical Specifications continued on page 5...)
2415-x02 Manual, Rev. E
Page 4
09/28/17
