1.2 Technical Characteristics
*
NOTE 1: dBc is relative to the COMPOSITE Output Level
Inverting
Frequency Sense
10 MHz Internal; Internal/External Selection
Reference
1 MHz; Fin = Fout Center Frequency Adjustment, 1.2 - 1.7 GHz
Frequency Step
-20 dBm, at Maximum gain
Output 1 dB Compression
Input Characteristics
Output Characteristics
Channel Characteristics
Synthesizer Characteristics
-50 to -30 dBm
Output Composite Level
<50 dBC in band, signal dependent and signal independent; See NOTE 1*
Spurious, In Band
TABLE 1.0
2083-1919-02 Block Translator Specifications*
±0.0 1 ppm
Translation; Accuracy
<-30 dBC, 0.5 - 0.94 GHz and 1.96 - 2.5 GHz; See NOTE 1*
Spurious, Out of Band
±2.0 dB, ± 0.25 GHz bandwith; ± 0.5 dB, any 40 MHz Increment
Frequency Response
-10 to +20 dB, ±2 dB, Selectable in 0.5 ± 0.5 dB steps
Gain
Fc = 1.2 - 1.7 GHz,±250 MHz
Frequency
75
Ω
/ 12 dB
Impedance/RL
+10 dBm
Input, maximum no damage
-50 to -30 dBm
Input Composite Level
950 - 1950 MHz
Frequency
75
Ω
/ 12 dB
Input Impedance/RL
Direct Readout LCD; Manual or Remote Selection
Gain (MGC)
Direct Readout LCD; Manual or Remote Selection
Frequency Translation
*+10 to +40 degrees C; Specifications subject to change without notice 2017 Cross Technologies, Inc.
100-240 ±10% VAC, 47- 63 Hz, 30 watts maximum
Power
Green LED; Red LED; Yellow LED
Power; Alarm; Remote
Type F (Female)
RF In/RF Out Connector
Other
Controls, Indicators
RS232C, 9600 baud (RS485, Ethernet Optional)
Remote
19 inch, Standard Chassis 1.75” high x 16.0” deep
Size
DB9; No or NC contact closure on Alarm
Alarm / Remote Connector
-100
-90
-80
-70
-70
1 MHz
100 kHz
10 kHz
1 kHz
100 MHz
dBC/Hz
Phase Noise @ F(Hz) >
Continued on page 5...
2083-1919-02 Manual, Rev. 0
Page 4
04/19/17
