B) Status Requests
Table 1.1 lists the status requests for the 2016-34 and briefly describes them.
*
PLEASE NOTE: The two character {aa}(00-31) prefix, in the table below,
should be used ONLY when RS-485, (OPTION-Q), is selected.
TABLE 1.1 2016-26 Status Reequests
TABLE 1.1 2016-26 Status R
equests
Command
Syntax*
Description
Command Status
{aaS1}
Returns {S1bbbbccIA} where:
• bbbb = Rx frequency (4 characters) OR
• bbbbb = Rx frequency (5 characters, option 5) OR
• bbbbbbb = Rx frequency (7 characters, option X)
• cc = Rx gain
• I = 0 - non-inverted Receiver; I = 1 - inverted
• A = Summary Alarm; 1=Alarmed, 0=Normal
10MHz Ref Status
{aaS2}
Returns {S2E} where:
(option E only)
• E = 1 - external 10 MHz switched in
2016-26 Manual, Rev. A
Page 6
2/2/09
