Rev D
Model MS-500x
CrossPoint Technologies, Inc
12
COM Mode: RS422
Press ENT to Confirm
UP IN MENU 1 2 3 4 5 ESC
DN OUT OFF 6 7 8 9 0 ENT
FLT PS
Similar menu choice selects baud rate. Factory default is 19200 baud.
Baud Rate: 19200
ENT: Edit ESC: Back
UP IN MENU 1 2 3 4 5 ESC
DN OUT OFF 6 7 8 9 0 ENT
FLT PS
Press ENT to drop into the menu item and scroll through available choices. Press ENT to change
the baud rate. Changing Serial mode parameters will cause the Matrix to reset itself automatically
when the action is confirmed, and will be operational again in about 6 seconds
4.4.5.1
Software Version
This read only display shows the current installed version of firmware in the system controller.
SW Version: v1.01
ENT: Back ESC: Back
UP IN MENU 1 2 3 4 5 ESC
DN OUT OFF 6 7 8 9 0 ENT
FLT PS
4.4.5.2
Ethernet Options
All Ethernet communication settings are made from these menu items. Press ENT to drop into
these items
Ethernet Options
ENT: Select ESC: Quit
UP IN MENU 1 2 3 4 5 ESC
DN OUT OFF 6 7 8 9 0 ENT
FLT PS
The default condition is for static IP addressing. Therefore, DHCP is off by default. The DHCP
selection menu appears first because its state will have an effect on data items presented in later
menus.
