Connect your stereo headphones (not included) to
the HEADPHONE JACK (10). While headphones
are connected, the internal speakers will be disabled.
COMPACT DISC CARE
To remove a disc from its storage case, press down
on the center of the case and lift the disc out,
holding it carefully by the edges.
Fingerprints and dust should be carefully wiped off
the disc’s recorded surface with a soft cloth. Unlike
conventional record, compact discs have no grooves
to collect dust and microscopic debris, so gently
wiping with a soft cloth should remove most particles.
Wipe in a straight line from the inside to the
outside of the disc. Small dust particles and light
stains will have absolutely no effect on reproduction
quality.
Clean the disc periodically with a soft, lint-free, dry
cloth. Never use detergents or abrasive cleaners
to clean the disc. If necessary, use a CD cleaning
kit.
Never write on or affix labels to the surface of compact
discs.
CARE OF THE CANBINET
If the cabinet becomes dusty wipe it with with a soft
dry dust cloth. Do not use any wax, polish sprays,
or abrasive cleaners on the cabinet.
CAUTION
Never allow any water or other liquids to get inside
the unit while cleaning.
The exclamation point
within an equilateral
triangle is intended to
alert user to the
presence of important
operating and
maintenance (servicing)
instruction in the
literature accompanying
the appliance.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION
The lighting flash with
arrowhead symbol, within
an equilateral triangle, is
intended to alert user to
the presence of uninsulated
"dangerous voltage" within
the product's enclosure
that may be of sufficient
magnitude to constitute
risk of electric shock
to persons.
CAUTION: TO REDUCE
THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE
COVER (OR BACK). NO
USER - SERVICEABLE
PARTS INSIDE. REFER
SERVICING TO QUALIFIED
SERVICE PERSONNEL.
CAUTION
For Compact Disc Units Only:
INVISBLE LASER RADIATION WHEN OPEN AND INTERLOCK FAILED
OR DEFEATED. AVOID DIRECT EXPORSURE TO LASER BEAM.
Specification
Frequency Range
: AM 530 - 1710 KHz
: FM 88 - 108 MHz
Power Supply
: AC 120V ~ 60Hz
Power Consumption : 18W
Speaker
: 3” 8Ohm 5W x 2
WARNING:
TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS
APPLIANCE TO RAIN OR MOISTURE. DO NOT REMOVE COVER.
PILOT LAMPS SOLDERED IN PLACE. NO USER SERVICEABLE
PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
* DESIGN AND SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE.
11
General
There is no Power
1
Make sure the radio is plugged in correctly.
2
Check to see that the power button is
pushed in.
There is no Sound
1
Check the volume level by turning the volume
knob.
CD does not play
1
Check to make sure CD is inserted correctly
(label side facing up).
2
Check that the surface of the CD is clean
3
Make sure function switch is set to CD.
Care and Maintenance
Headphone Jack
Troubleshooting
B
E
N
ZEN
E
C
L
E
AN
E
R
