Playing a CD
1. Press the Input button on the remote or front panel to select the CD operation
mode.
2. Open the simulated title strip compartment and press the Open/Close button on the
remote or on the front panel to open the CD compartment.
3. Insert a disc with the printed side facing up. Press the OPEN/CLOSE button on the
remote or on the front panel again to close the compartment, READING is
displayed as the CD player scans the contents of the disc.
4. Track No. 1 will be played automatically after it finishes the reading of CD contents.
5. Press FF>> or FR<< on the remote once or repeatedly un til the desired track
number appears in display. Press and hold either the FF>> or FR>> to advance or
go back within a song or track.
6. Press the STOP button on the remote or the front panel to stop playback
completely.
7. For repeat play of a single song or CD track, press REPEAT on the remote once.
Press REPEAT twice to repeat the entire CD
8. Press the Play/Pause button on the remote to suspend playback. Press the
Play/Pause button to resume playback.
CD-MP3 Disc Playback
If your MP3 CD is separated into folders, follow the steps below to access the folders.
1. While the CD is stopped, press the Folder Up or the Folder Down buttons on the
remote to advance forward or backwards through the folders on your disc.
2. Once the desired folder is reached, use the Forward Skip or the Backward Skip
buttons to select the desired track.
3. Press the Play button to begin playback of the selected track.
4. For repeat play of a single song or CD track, press the REPEAT once. Press
REPEAT twice to repeat the current folder. Press the
to repeat all the folders on CD.
Programming Tracks
You may store up to 20 tracks in the desired sequence from any readable CD disc.
1. Use the remote and press the STOP button using the remote press PROGRAM t o
start programming.
2. Press PREV/CH+ or NEXT/CH- on the front panel or the remote press FF>> or
FR<< once or relatedly until the desired track number appears in the display.
a. For MP3 use the remote and press the STOP button. Using the remote, press
PROGRAM to start programming.
b. Press PREV/CH+ or NEXT/CH- on the front panel or on the remote. Press
FF>> or FR<< to select desired folder. Then press PROGRAM again to select
the desired track. Press FF>> or FR<< once or repeatedly until the desired
track number appears in the display.
