background image

22

CARE & CLEANING 

Freezer Light Replacement

REPLACING LIGHT BULBS

 

1  Unplug refrigerator.

 

2  Wear gloves as protection against possible broken glass.

 

3   Remove light cover, if necessary.

 

4  Unscrew and replace old bulb with an appliance bulb of   

the same wattage.

 

5  Replace light cover, if necessary.

 

6  Remember to plug the refrigerator back in.

Refrigerator Light Replacement

CAUTION

Wear gloves when replacing light bulbs to avoid getting 
cut.

Vacation and Moving Tips

Short Vacations

• 

Leave refrigerator operating during vacations of 3 weeks or less.

• 

Use all perishable items from refrigerator compartment.

• 

Turn automatic ice maker off and empty ice bucket, even if you will only be gone for a few days.

Long Vacations

• 

Remove all food and ice if you will be gone one month or more.

• 

Turn off automatic ice maker and turn water supply valve to closed position.

• 

Turning refrigerator controls to “

OFF” by pressing and holding the On/Off button for 3 seconds (electronic) 

or turn control knobs to “0” (manual) on the mechanical controls only controls your refrigerator’s cooling 
system.  To turn off power to your refrigerator you must unplug the power cord from the wall outlet.

• 

Clean interior thoroughly.

• 

Leave both doors open to prevent odors and mold build-up.  Block doors open if necessary.

Moving

• 

Remove all food and ice.

• 

If using handcart, load from side.

• 

Adjust rollers all the way up to protect them during sliding or moving.

• 

Pad cabinet to avoid scratching surface.

IMPORTANT

If the refrigerator is going to be stored or moved in freezing temperatures, the water in the ice and water system must be drained 
completely. Failure to do so could result in water leaks when the refrigerator is put back into service. Contact a service representative 
to perform this operation.

Summary of Contents for CEDS563RB1




























Reviews: