17
SECTION 4
PRODUCT FEATURES / FAMILIARISATION
For 18 x fan sprayer models the AR pump must to be
connected to tractor hydraulics.
In sprayer models without a Micro Power Pack the pump is
mounted to a 2 point or 3 point linkage self-steer drawbar
and driven by a heavy duty PTO shaft. 3 point linkage
pictured below.
FUSION CONTROLLER & CONNECTION
Quantum Mist Smart Sprayers come equipped with the
Fusion Controller. The first truly intuitive controller designed
for viticulture.
An Integrated joystick is used to control all sprayer and
hydraulic functions.
CANBUS technology.
It allows for full electric over hydraulic control which allows
for many of the new Smart Sprayer features.
From battery to cab is a power loom (MT90LOOM/
PWR), and thereafter is the Fusion loom (CHLOOM-
FUSION) which connects to the ECU module (mounted
at the front of the sprayer).
The front end of the loom has 3 connections for:
• Console (12 pin)
• Joystick (6 pin)
• Updating port (4 pin) or optional Nupoint
Followed by a power lead which picks up the
MT90LOOM/PWR.
Behind the cab is a connection to break tractor from
sprayer – a handy way to make sure everything is off.
Note the section valves can draw a small current even with
the controller turned off.
At the sprayer the loom connects to the ECU Module with
2 large pins.
From here are connections for:
• Micro Power Pack (level switch)
• Pump speed (pump is powered by tractor remotes)
• Flow meter
• Proximity or GPS Speed Sensor
• Spray “dump” / by-pass valve
• Flow Meter
• Pressure Transducer
• Tank level (optional)
