5
Assembly Instructions
Battery
Pump
1.
The battery harness (a) has a 2-pronged plug.
This wiring harness needs to be connected to
the Shurflo Pump® wiring harness (b). Make
sure the wire colors match.
2.
The battery end of the wire harness needs to
be connected to a 12 volt DC power source.
Connect the red wire to the positive power
battery terminal. The black wire needs to be
connected to the negative terminal of the
battery.
Note: Use caution when routing the wiring
harness to avoid areas where the wires can be
pinched, rubbed, or exposed to excessive heat.
Warning: DO NOT PLUG BATTERY
CHARGER INTO PUMP!! It will cause
serious damage to the pump and or
charger.
Black
Red
a
b
Black
Red
Summary of Contents for LGX5P
Page 8: ...8 Notes...