Spinna Winna Operators Manual
Part No. 990xxx Issue 1
Page 14 of 31
5. MAINTENANCE TASKS
This machine is protected by 3 different tilt mechanisms – the bob tilt, slam tilts and
intelligent tilts. The settings of each can be adjusted to alter their sensitivity. Please note that
these settings are critical to ensure secure game play, they must be set sensitively enough to
protect the machine, but if they are set too sensitive the game play may be affected.
5.2 Tilt mechanism adjustment
5.1 Recommended daily routine maintenance.
•
Visually check that the machine is clean inside and out and that all the lamps are
working.
•
Check the operation of all coin entry points making sure there are no jammed coins
and empty any coin reject trays if fitted.
•
Check that all coin changers are operating correctly (if installed).
•
Check that the playfield is correctly set-up with coins but do not attempt to change a
playfield which has already been set up.
•
If merchandise is being used on the playfield, make sure that none of the
merchandise is in a position that may affect the operation of the lose holes as this
will have a detrimental affect on the earning potential of the machine.
If any problems are found refer to the ‘The troubleshooting guide’.
WARNING:
•
Maintenance and repair work should only be carried out by suitably skilled and
trained persons.
•
To avoid electrical shock, switch off and disconnect electrical power supply before
working on the machine.
CAUTION:
•
When touching any P.C.B. or their component parts, take full anti-static precautions
at all times, or electronic components may be damaged.
•
Note the orientation of all P.C.B’s and their components before removal to ensure
correct reconnection.
•
After installation, test any affected parts for correct function before use.