5
HINTS OF OPERATION
During uphill compaction, it may be necessary to swing the handle over and pull the
machine slightly.
When compacting on a sloping terrain, the machine may tend to slide sideways. The
operator must steer toward the rise causing the machine to travel at an angle.
When operating the machine in wet or damp soil, it may occasionally be required to
clean the bottom of the base plate. Mud accumulation on the base plate will slow the
machine down and prevent efficient soil compaction.
When operating this compactor on asphalt surface, it is recommended that light oil or
kerosene be applied to the bottom of the base plate to prevent asphalt sticking and/or
accumulation.
Operating the machine on a fully compacted, hard, or non-yielding surface will cause it
to bounce and damage exciter bearings, and will greatly reduce the life of the
machine. Reduce engine speed to eliminate bounce.
When transporting the unit ensure the fuel tap is turned “OFF” to prevent flooding.
