MEASUREMENT PROCEDURE
10
4.Lightly place the bulb on the
table.
5. The pressure in the cuff will
begin to decrease.
Since the heart mark
appears, do not talk or move body
during this operation.
6 When the deflation mark
appears, press the Auto deflation
valve button, release all air from
the cuff.
7.The display will automatically
alternate between your pulse rate
and your blood pressure
Note: In the case of repeat
measurements, allow the arm to
rest for at least five minutes if the
same arm is to be measured.
Follow the same measurement
procedures form Step 1.
SYS DIA
Pulse/min